how to change ukulele strings

Best Complete Guide About how to Change Ukulele strings?

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on tumblr

Ukulele playing is so heart touchy right? A ukulele is easy to use for the beginners. That’s why teenagers prefer to use it.If you are a newbie with ukulele then stay with us. In our website we try to help you with the basics of all music instrument. Ukulele is great to use when you can maintain it properly. To give you a hand we have designed the article about how to change ukulele strings. Be with us for the next 4 minutes. Hope you will get your expected answer.

Here we have some up the procedures of how to change ukulele strings. This will also help you to get all the basics idea. So have a look for the next steps.

Guitar and Ukulele are two different musical instruments. So there will be difference in theirstrings also you need extra care and for them. Keep in mind that both the in-students sounds differently because of the difference of materials.

Inacoustic guitar metals are used as strings On the other hand,in classical guitar the string is silver-wound materials. They are a little bit fragile, susceptible to corrode, rust, stretch out, and break. Heavier guitar strings creates low tones.

And other materials like steels, silver, and other metalsgenerally oxidize when it comes into the touches of air and water.Sometime the string can change from the oils from your skin.

So try to change thestring of the guitar within a month. It will help to maintain the exact tone. Besides these if you change strings it will prevent the rust due to corrosion on the strings.

Types of Ukulele Strings

Though the strings can be fragile but this is not so stress factors because they are made of nylon strings which is durable. Most of the ukulele have nylon made strings. But, Baritone ukuleles and some soprano ukuleles are an exception.

Because Baritone ukuleles has a mixture  of plain or non-wound strings and wound strings, similar to classical guitar strings. Moreover most  soprano ukulele string are designed to have low wound G and C strings.These strings require. replacement within a short interval.These type of  strings are available like the other plain, non-wound strings.

When to Change Strings

When you identify the types you have got the first answer of how to change ukulele strings. Actually if you are a beginner the ukulele will be troublesome for you at the first step. Moreover it is not good choice for the typical rappers.

Mainly  the nylon strings is morestretchable and that’s why it take time to set. But if theysettle, or “break-in,” the strings have the possibility to be durable. You will be the  several years of playability. So , if your new instrument have a new ukulele is not working properly, then you may try to pre-stretch your strings.

Don’t be confused  we can help to guide you how to set the strings. The main fact is that’s most nylon strings lasts in an average of 1-2 years, so it is the best to   change the strings when there are signs of wear, fraying, discoloration, or loss of tone. On top of that if you want a change in your ukulele‘s sound then surely change it.

What Kind of Strings Should I Use?

There are variety  of ukulele strings. ButAquila Nylgut strings are the most user  friendly strings. It is beginner friendly due to the full, voluminous, tone and easy-to-play medium tension. So manufacturers also prefer to use it.

This, Aquila Nylgut string is the bestchoice for strumming chords and a wide variety of applications on most of the new fashioned ukulele model. They have  synthetic strings which ensure a delicate the sound and gives a vintage gut strings. They are recognizable for their solid  and great white appearance.

Your choice matters

String changing depend on your choice actually. If your preference is a crystal clearer tone, then it will be good to try a crystal, nylon, or any other synthetic composite string like: Worth, D’Addario, or Martin.

These strings can give you a classical guitar-like tone. You will get here a clear visionand  clarity and a vast separation of timbre between the specific notes.

On the other side if you prefer the  most vintage instruments we will suggest to use these types of strings because they retain a more vintage look for a long time. And the sophisticated bold white Aquila strings have only been introduced in the past decade.

Though it has gained more popularity with time. On vintage instruments, you may find the nut and bridge. Theyrequire  to be re-fitted so that they can easily accommodate the thicker gauge of the specific strings.

You can initially start with one of these to identify the quality of strings and experiment to find out what sounds best for you. This will be helpful and budget friendly for you.

How to Replace a Ukulele String

Here the time is for replace your Ukulele strings. Though they aren’t a jumbled process so you can easily start it to your home. You will need some basic instruments like:

ems needed:

  1. thread or specific strings: Choose your preferable thread which you want to replace. Make sure that it will be a durable one to lessen the hassle.
  2. Wire cutters: Choose any sharp cutter. You can use any  nail clipper. Wire clippers should be like that you can cut the wire and nylon strings in one step. Otherwise the process will take more timeto cut it.
  3. String Winder: String winder will help to set the string inside the ukulele ‘s box easily.
  4. Tuner: Tuner will ensure The basic tone of you musical instrument. So try to keep it before starting the above mentioned steps.

After arranging all these items try to find out if your ukulele need any kind of  bridge or not. If it is needed then you have to replace it  because through this step you can identify  what type of knot to use to make the string durable.

There are different types of ukulele bridge. Among these,the most common types are a tie-bar ukulele bridge or a slotted ukulele bridge. That are flexible to use and maintanance is easier.

For a successfull Ukulele strings changing you need to maintain the following steps easily so lets know about these:

1. Start by gathering the things you’ll need

Before starting the as usual process, try to gather all the things you will need. This procedure will make your task prompt and easier. You have to accumulate things like

  1. ukulele,
  2. a cloth, a tuner,
  3. a pencil, and
  4. wire cutter (or, if you’re in a pinch, scissors).

Be aware of buying all these things Because there are enough chances  to pick the wrong-size set of strings and unnecessary stuffs from  the store, so make sure you have the right strings for your ukulele before the main proceedings.

2. House cleaning

House cleaning is a good option. After removing  the strings try to clean the dust stored in it.Whenever you off the strings it is easier to reach those places under the strings.And that’s how it attracts dust, like near the bridge or around the tuners.

If your fingerboard has generated some junk, then you  should clean it off as early as possible by gently rubbing your fingerboard. Don’t forget about your wood grain, clean it cautiously with an  extra-fine steel wool. Try to use a 0000 gradewool.

It usually can remove the dust build-up from the instrument. And relax cause it wont effect your the wood. On top of that you can see a eye catchy  shines in the  frets and edges.

3. Smooth running

At this stage you need to  use  a sharpened pencil if you want  to add a little graphite  through the “pencil lead in  each slot on your ukulele’s nut. This  procedure will helpful to  slide the strings easily and smoothly through the slots. This step is necessary for a durable strings. So must including in your list.

4. Tie-up

It is the time to tie up your strings. Here  you can anchor the string to the bridge. Start from the end corner and start by feeding one end of the string through the back of the bridge, then wrap it around itself to make the bond stronger. Get it snug around the base of the bridge, then wrap the excess under the string once, then twice. This keeps the string from slipping. Pull it tightly into place so the string is now anchored.

5. Peghead end

You are heading to the last steps eventually. Do the process you will get enough fun. On top of that try  to wind the string around the peg. It is good if you do the same process three times at a stretch.You shouldn’t  do the step  more than one time because that may harmful for  the peg.

As it gets too messy and can interfere with tuning. And so some  tunes canbe a little less secure. So before  do this, try to mark the point by crimping the string about 1 ½ to 2 inches in the peg. And start to feed the string by  the pre situated  hole whenever the crimp is entered  through the peg hole.

6. Wind ’em up

If you follow the previous steps according to our instruction then now you may start winding the string. Use a string winder here.Because, a string winder can help to prompt the whole process and save your time. But the matter of sorrow that i the process has the same effect if you dent use the winder. So it is your choice to use winder.

And if you use this winder then wrap the first turn above the tuning peg’s hole, then just before you complete one full turn, push it down below the hole and continue winding. This wraps will help the strings o cut off the excess length and it gives the string a  tightbond. It actually  protect the strings  from slipping below. Continue winding until you bring the string up to pitch. This is an important step.

7. Finishing up

Congratulations. You are at the last step of changing your strings. Most probably you will have at least  should have three or four neatly wound turns of string at this step. It can make your peg more strong. Well one more thing, here you should use  your wire cutter to cut  off the excess string attached to the board. Do the same process for each string to cut off the excess strings and have a safe using.


  • Why Does my Ukulele sound band?

Due to the fingers or frets.

If you use your ukulele without consciousness or use it from very close to your finger or fretboards, then it will make a weird sound. Some musicians use ukulele near to the neck, so it is another reason behind bad sound.

  • Do ukulele strings break easily?

Generally ukulele strings don’t break easily.But they tend to break when you use thin wire. And then it make a mess. So if you want to prevent the breakage use metallic wire or good quality  wire.

  • What is a good brand Ukulele?

There are various ukulele brand. For you we have created a list of best Ukulele brand and they are:

  1. Cordoba
  2. Kala
  3. Martin
  4. Lanikai
  5. Fender
  6. Mahalo
  7. Oscar Schmidt
  8. Lohanu
  9. Luna
  10. Donner etc.

Final words about how to change ukulele strings

Ukulele is the best instrument for a beginner musician. There are enough brands to use. But as you know the maintenance is must for long lasted one. Sotry to maintain your favourite ukulele. We care for you and that’s why we tried to give basic ideas about how to change ukulele strings.

You can use it as a beginner or if you are used to with ukulele you can also try it. We hope that your instrument will get a new life span.Moreover, if you want to know more about any other things then don’t forget to knock us because we have solution for all musical instruments.

Related Content